An automatic cutter is an indispensable or missing part of the packaging profession. At present, the variety of stickers produced in our country is gradually increasing, and the technical level has also made great progress. The decline of manual and semi-active stickers has been abandoned, and proactive high-speed stickers are taking over the market.
Regarding the survival of an enterprise, it is said that enterprises are driven by science and technology and seek quality to survive, because quality is the goal that enterprises pursue forever. This automatic toothpick nail cutter is designed to orient a tooth in an automatic toothpick direction, so you should consider changing the new tooth wheel and tooth distance. You can adjust it using the following method: Open the screw to adjust the tooth wheel, then pull the tooth wheel by hand to adjust the tooth wheel on the back of the machine. Also note: the number of teeth must rotate equally, and the rotation cannot exceed three teeth.
The fully automatic cutting machine is equipped with a tooth adjustment plate, screw and nail-shaped piece to adjust the neck teeth. Look at the cutting pressure effect. If the effect is not satisfactory, you can adjust it. Pay attention to the rotating teeth. The teeth should be turned around. If the pressure is too low on the left or right side, this method can also be used to adjust the pressure to the tooth edge, and try using a smaller nail-shaped piece to fit 1-2 teeth.
