In the actual use process, the cutting objects to be faced by the paper cutter are various, in addition to paper and cardboard, there are leather, plastic, cork floor and PS version, etc. Due to the wide variety of materials to be cut, different paper press pressures should be used for different materials, and the angle of the cutting edge should also be changed to ensure high-quality cutting products.
edge angle
The choice of the cutting edge angle is a very important part of the cutting work. In other words, a good paper cutter should be equipped with a good paper cutter and sharpening process. However, in the after-sales service of the paper cutter, we found that many paper cutter users often ignore this point. As a result, the impact force during cutting is often increased due to the wrong way, method and angle of the paper cutter blade sharpening. , causing the safety screw to loosen or even break, eventually causing mechanical damage.
The range of materials that need to be cut by the paper cutter is getting wider and wider, such as beer aluminum foil cap label, carbonless copy paper, honeycomb cardboard, magnetic card, photosensitive film, etc. These materials will encounter different practical problems in the cutting process. For example, carbonless copy paper is prone to indentation during cutting, while magnetic card and photosensitive film may not be able to be fixed by the paper press during cutting, resulting in waste products. These problems can be solved smoothly by adjusting the pressure of the paper press, improving the blade and cutting drive system. However, as far as the author understands, only some paper cutter manufacturers in China can solve all these technologies.
