The die-cutting machine is mainly used for die-cutting, creasing and cold-pressing of trademarks, cartons, greeting cards, etc. in the paper product packaging and decoration industry. It is an important equipment for post-press packaging processing.
Types of die-cutting machines Die-cutting machines are mainly divided into three types: round pressing, round pressing and flat pressing according to the different imprinting forms. According to the form of template placement, it can be divided into vertical and horizontal. There are two kinds of manual (semi-automatic) and automatic according to the degree of automation. In terms of function, in addition to die cutting, there is also a hot stamping function, which is called a hot stamping die cutting machine, and some have an automatic waste removal function, which is called a waste removal die cutting machine. The characteristics of the circular die-cutting machine are line contact, low die-cutting pressure, and high production efficiency. .
First of all, the operator should pay attention to dustproof and clean. In actual production, a large amount of waste paper edges and paper wool will be generated when die-cutting the carton. If you are not careful, it will enter the chain transmission part, the moving platform of the die-cutting part and some rotating parts, and may block the photoelectric detection head, etc. , causing a malfunction. Therefore, the cleaning of the body of the die-cutting machine must be the first priority, and then the machine can be guaranteed to operate without problems.
Second, the oil change of the die-cutting machine. The main action of the die-cutting machine is that the main motor drives the slide bar and pulley, and then drives the four toggle bars to move, which can reach 6,000 sheets per hour in high-speed operation, and it is very troublesome if there is no good lubrication and cooling.
