It is mainly composed of a pneumatic motor and a power output gear. It relies on high-pressure compressed air to blow the motor blades to make the motor rotor roll, output rotational activity to the outside, and mobilize the entire working form to convert part of the activity through the gear. According to whether the stator and the rotor are concentric, the air motor can be divided into a concentric motor and an eccentric motor. According to the number of air inlet holes, it can be divided into a single air inlet motor, a double air inlet motor and a multi air inlet motor. Wait. No matter what form of air motor, it relies on compressed air to blow the motor blades to mobilize the rotor to rotate. When the motor blade rotates at a high speed, friction occurs with the inner wall of the stator, so it is very careful about the quality of the compressed air and whether there is lubricating oil in the compressed air.
conversion part. It is important to engage in the corresponding transformation of the rotational activity output by the motor.
In the automobile manufacturing industry, because there are many ways of threaded connection, most of them are rotary activities, although there are also linear reciprocating activities. For different types of pneumatic tools, the work mode conversion part is mainly divided into mechanical clutches and planetary gear sets, friction disc clutches and planetary gear sets, hydraulic cylinders, torsion bars and hammering block sets. The above components are all important components based on rotating activities, which determine important parameters such as the torque, speed, and tightening accuracy of the pneumatic tightening tool.
Intake and exhaust part:
It is usually the pneumatic switch, because it is in direct contact with the executive and external objects.
Energy supply section:
Compressed air is mainly formed after the air compressor compresses the atmosphere, and is transported to the relevant gas and electricity by the compressed air pipeline.
Air filtration and air pressure conditioning part.
Between the compressed air conveyed by the pipeline and the pneumatic tool, a compressed air filter and conditioning device must be installed, and the pneumatic triplet undertakes this task. The pneumatic triplet is mainly composed of a barometer, a filter, a lubricator, and a pressure regulator.
The above-mentioned parts of the waste cleaning machine are the common realization process of each other.
