1. Pneumatic tools are about maintenance, not maintenance.
2. Pneumatic waste removal machine is different from other pneumatic tools. After a one-week running-in period, and keep the chain and sprocket sliding unimpeded at any time, add a few drops of gear oil to the chain every half a working day to reduce friction, in order to prolong its service time.
3. First make sure that the machine is connected to the air source, ensure that the air pressure is 6-8 kg force, and the trachea requires 8*12M/M to work normally.
4. Before the air pressure is turned on, drive the chain by hand to see if it can roll freely, otherwise it cannot be used. After adjusting the picking direction of the waste cleaning machine, fix the locking screw 38# so that it cannot swing.
5. Turn on the slide switch 01# before working. Or adjust the front pressure regulating valve to the maximum.
6. Inject professional air tool oil from the air inlet to lubricate the motor.
7. When working, press the platen 3# to start working.
8. Before going to and from get off work every day, be sure to drop three to four drops of special oil for pneumatic tools from the air inlet, and idle for 2-3 seconds.
